Download
APC Device IP Configuration Wizard 3.0.1 can be downloaded from our website for free. Apcutilg.exe is the frequent file name to indicate this program's installer. APC Device IP Configuration Wizard belongs to Internet & Network Tools. Our built-in antivirus checked this download and rated it as 100% safe. The Network Management Device IP Configuration Wizard only supports the discovery of unassigned devices. You cannot search for assigned devices already on the network using an IP range unless you enable SNMPv1 and set the Community Name to 'public'. For more information on SNMPv1, see the UserGuide. When the NMC IP address settings are configured, to access.
128 pages, 930.29 Kb Success! {{ $ctrl.successMessage }}
0'>Errors!
>
Run the Wizard to perform the configuration. To discover and configure the unconfigured Rack
1.From the Start menu, launch the Wizard. The Wizard detects the first Rack PDU or network-
2.Select Remotely (over the network), and click Next >.
3.Enter the system IP, subnet mask, and default gateway for the Rack PDU or device identified by
On the Transmit Current Settings Remotely screen, if you check-mark Start a Web browser
when finished, the default Web browser connects to the Rack PDU or device after the Wizard
4.Click Finish to transmit the settings. If the IP address you entered is in use on the network, the
Wizard prompts you to enter an IP address that is not in use. Enter a correct IP address, and click
5.If the Wizard finds another unconfigured Rack PDU or device, it displays the screen to enter
TCP/IP settings. Repeat this procedure beginning at step 3, or to skip the Rack PDU or device
whose MAC address is currently displayed, click Cancel.
Configure or reconfigure the TCP/IP settings locally1.Contact your network administrator to obtain valid TCP/IP settings.
2.Connect the provided serial configuration cable (APC part number 940-0144A) from an available
communications port on your computer to the serial port of the Rack PDU or device. Make sure
3.From the Start menu, launch the Wizard application.
4.If the Rack PDU or network-enabled device is not configured, wait for the Wizard to detect it.
5.Select Locally (through the serial port), and click Next >.
6.Enter the system IP, subnet mask, and default gateway for the Rack PDU or device, and click
7.On the Transmit Current Settings Remotely screen, if you select Start a Web browser when
finished, the default Web browser connects to the Rack PDU or device after the Wizard transmits
Apc Network Management Device Ip Configuration Wizard
8.Click Finish to transmit the TCP/IP settings. If the IP address you entered is in use on the
Apc Network Management Device Ip Configuration Wizard Download
network, the Wizard prompts you to enter an IP address that is not in use. Enter a correct IP
9.If you selected Start a Web browser when finished in step 6, you can now configure other
parameters through the Web interface of the Rack PDU or device.
Is this the NIC card you have installed in your UPS?
If so, have you tried using the 'Network Management Device IP Configuration Wizard' to configure it? If you don't have that application, you can download it from here:
Apc Network Management Device Ip Configuration Wizard Reviews
Connect your UPS to the same network as the computer you are using to configure it. You can install the configuration wizard and follow the step-by-step instructions that you can find on that same page. I haven't done it in a while but from what I remeber it is very straight forward with that software.